Select your car
rear axle
Model:
911 77
-
Illustration:
501-00
Parts that fit your car
Position | Description & partnr | |
ball pin see technical information NR.23 V. 19.03.79 91133191500 |
||
Lock nut 90091009202 | ||
Spacer ring 91133110701 | ||
Eccentric screw 91133330300 | ||
Hexagon-head bolt 91133330500 | ||
Washer 91133330700 | ||
Hexagon-headbolt m 10 x 30 90007504302 |
||
1 | rear-axle cross-tube 91133101003 |
|
2 | rear-axle trailing arm 91133151300 |
|
2 | rear-axle trailing arm 91133151400 |
|
3 | 911 (65-89) Inner bushing for rear trailing arm (4 needed per car) 90133105900 |
|
4 | washer AN0115344 |
|
5 | hexagon-head bolt M 14 X 1,5 X 75 90008206402 |
|
6 | hexagon nut M 14 X 1,5 99908401402 |
|
7 | Wheel bearing, rear used on 911 (74-89, non-Turbo), 924S (86-88), 9442 (85-91) en 968 (92-95) 99905302001 | |
8 | Reinforcement cover 91133156130 | |
9 | Hexagon-headbolt m 8 x 22 90007507902 | |
11 | Rear-wheel hub 91133106533 | |
12 | Replaced by 99333167102 90434167100 | |
13 | (Model: 911/911S
CARRERA 2.7)drive shaft 90133223200 |
|
13 | Drive shaft 92333223201 | |
14/1 | 911 (late '75-'85) CV-Joint, with 6 bolt pattern 92333203200 | |
14 | (Model: 911/911S CARRERA 2.7)911 (69-75, Sportomatic 69-83) Drive shaft, with 108 mm cv-joints and 4 x 10 mm bolts. 91133203309 | |
14/2 | (Model: 911/911S CARRERA 2.7)Cup spring 90133231200 | |
14 | 911 (75-85) Drive shaft, with 100 mm cv-joints and 6 x 8 mm bolts. (84-85 only gearbox types 915.67/68) 92333203302 | |
14/2 | cup spring F 91151 00728>> F 91151 10610>> F 91152 01530>> F 91152 10860>> F 91153 00273>> F 91153 10148>> F 91154 00174>> F 91154 10089>> F 91156 00321>> F 91156 10120>> 90133231110 |
|
14/1 | (Model: 911/911S
CARRERA 2.7) 911 (69-75, Sportomatic 69-83) CV-joint, 108 mm for 4 x 10 mm bolts. 91133203202 |
|
15 | (Model: 911/911S CARRERA 2.7)911 (69-83) Circlip for driveshaft 99904101201 | |
15 | Circlip 99904101601 | |
16 | (Model: 911/911S CARRERA 2.7)Clamping pin diam. 10 x 20mm 99909501900 | |
17/2 | 911 (75-85) Axle boot, for 6 bolt pattern with 8 mm bolts. Original Porsche with the thick aluminium flange, gasket included. 92333203700 | |
17 | (Model: 911/911S CARRERA 2.7)Protection cap 91133229502 | |
17/1 | (Model: 911/911S CARRERA 2.7)911 (69-74) Axle boot 90133229312 | |
18 | (Model: 911/911S CARRERA 2.7)Clip 91133225700 | |
19 | (Model: 911/911S CARRERA 2.7)911 (69-74) Axle shaft seal 90133229700 | |
19 | prod. year 75-85 Axle shaft seal 92333229700 | |
20 | (Model: CARRERA 2.7) Replaced by 90006722901 90006722909 |
|
20 | pan-headscrew M 8 X 50 F 91151 00278>> F 91151 10610>> F 91152 01530>> F 91152 10860>> F 91153 00273>> F 91153 10148>> F 91154 00174>> F 91154 10089>> F 91156 00321>> F 91156 10120>> 90006721101 |
|
21 | (Model: CARRERA 2.7)Lock washer 99952310301 | |
22 | (Model: 911/911S CARRERA 2.7)Plate for M10 bolts 91133219100 | |
24 | Washer 99902504601 | |
25 | Cotter pin 4 x 40 N0125381 |
|
26 | Rear axle strut 90133300301 | |
26 | 911 68-86 Adjustable rear axle support 91133300900 | |
27 | hexagon-head bolt M 12 X 1,5 X 35 90008301908 |
|
28 | Hexagon nut M12 x 1,5 N0110208 | |
29 | Washer 90133314301 | |
30 | Lock washer 99952310902 | |
31 | Eccentric 90133313304 | |
32 | Eccentric 90133313305 | |
33 | Hexagon nut M12 X 1.5 small 90007801702 | |
33/1 | Hexagonnut m 12 x 1,5 blue 90007601602 |
|
34 | torsionbar $ 23 left 90133310105 | |
34 | torsionbar right 90133310205 | |
35 | 911 65-89 Cover plate for rubber bushing 90133315300 | |
36 | Washer 10,5 90002500802 |
|
37 | Hexagon-headbolt m 10 x 28 90007504202 |
|
38 | Spacer ring 90133110700 |