Select your car
rear axle
Model:
356 65
-
Illustration:
501-00
Parts that fit your car
| Position | Description & partnr | |
| Set of fastening parts without hose clamp PCG59800100 |
||
| Half-round screw m 4 x 18 90014602502 |
||
Replaced by 90015102801 90015102802 |
||
| Hexagon nut
m 4 N0110046 |
||
| 1 | Rear-axle cross-tube 64433120100 | |
| 2 | Gasket 0,20 mm 64433193101 | |
| 2 | Gasket 0,10 mm 64433193100 | |
| 3 | Housing use also: sealing ring 111.501.139 64433122100 |
|
| 4 | All 356 Solid rear axle boot, sold without strapclamps. (Hub carrier needs to be removed when installing this boot.) 64434191 | |
| 4 | All 356 Split rear axle boot, sold with screws and clamps. With this boot there is no need to remove the hub carrier for installation. 644341911 | |
| 5 | Hose clamp Norma 80-100mm 99951235002 | |
| 6 | Hose clamp Norma 32-50mm 99951249900 | |
| 7 | (Model: 356 B)Connecting flange 64434011 | |
| 7 | (Model: 356 C)Connecting flange 69533121110 | |
| 7 | (Model: 356 B)Connecting flange 64434012 | |
| 7 | (Model: 356 C)Bearing flange 69533121210 | |
| 8 | (Model: 356 C)Hexagon-head bolt m 12 x 1,5 x 75 N0101833 |
|
| 9 | Pin
10 x 40 N0128011 |
|
| 10 | Spacer 64433123100 | |
| 11 | Ball bearing, used on all 356 as rear wheel bearing and on 911 (74-83) with sportomatic gearbox as rear mainshaft bearing 90005200600 | |
| 12 | (Model: 356 B)large o-ring behind rear wheel bearing 356a-b 35634144 | |
| 12 | (Model: 356 C)O-ring
99970109250 |
|
| 13 | All 356 Washer between wheel bearing and spacer 35634402 | |
| 14 | (Model: 356 B)Washer 35634410 | |
| 15 | Gasket 35634142 | |
| 16 | (Model: 356 B)356 Pre-A/A/B Spacer ring between rear wheel bearing and brakedrum, only for cars with drumbrakes. 35634401 | |
| 17 | (Model: 356 B)Sealing ring 113501315H | |
| 17 | (Model: 356 C)356C Wheel seal 99911303850 | |
| 18 | (Model: 356 B)Housing 64433125100 |
|
| 19 | (Model: 356 B)Waved spring washer, M10. N0122301 | |
| 20 | (Model: 356 B)Fasteningscrew 99907400601 |
|
| 21 | (Model: 356 C)Rear-wheelhub 69533190300 |
|
| 22 | Wheelbolt
90134167101 |
|
| 23 | (Model: 356 C)Protectiveplate 69533108500 |
|
| 24 | (Model: 356 B)Rear axle strut 64434104 | |
| 24 | (Model: 356 C)Rearaxlestrut 69533301300 |
|
| 25 | Hexagon-headbolt m 12 x 1,5 x 22 99909300502 |
|
| 26 | Washer for rear tracking adjustment bolt 356 35634153 | |
| 27 | Lock ring b 12 f >> 110 406 f >> 153 022 f >> 87 491 up to transmission number 35 000 b = from transmission number 35 001 90002701702 |
|
| 28 | Hexagon nut M12 x 1,5 N0110208 | |
| 29 | (Model: 356 B) 356A/B Bracket on rear axle for bump stop, left 64434023 |
|
| 29 | (Model: 356 B)356A/B Bracket on rear axle for bump stop, right 64434024 | |
| 30 | (Model: 356 C) No longer available new 69533303500 |
|
| 30 | (Model: 356 C) No longer available new 69533303600 |
|
| 31 | (Model: 356 C)Stop 69533326100 |
|
| 31 | (Model: 356 C)Stop 69533326200 |
|
| 32 | (Model: 356 B)356A/B Rubber stop rear suspension 64434206 | |
| 32 | (Model: 356 C)356 C Rubber stop rear axle 69533331100 | |
| 33 | (Model: 356 B)Shouldered bolt 64434205 | |
| 33 | (Model: 356 C)Screw 69533351300 | |
| 34 | Spring washer b 12 90002801401 | |
| 35 | Hexagon-head bolt m 12 x 1,5 x 30 90008200601 | |
| 36 | (Model: 356 B-T5/T6
356 C
COUPE
-REUTER-
CABRIO
HARDTOP
ROADSTER) All 356, 911 (65-67) Rubber bushing rear torsion arm, smooth 64433313100 |
|
| 36 | (Model: 356 B-T5/T6
356 C
COUPE
-REUTER-
CABRIO
HARDTOP
ROADSTER) All 356 Set of Rear torsion bar outer rubber bushing with ribs, for use with later model covers (cover nrs 64433315101 and 69533315101) 64433313101 |
|
| 37 | (Model: 1600/1600 S
1600:M
1600 S:M
1600 S90
CARRERA)Torsion bar torsion bar see group 5/02/00 64433310101 |
|
| 37 | (Model: 356 C)Torsion bar 69533310103 | |
| 37 | (Model: 356 C)Torsion bar 69533310203 | |
| 38 | (Model: 356 B-T5 COUPE -REUTTER- CABRIO HARDTOP ROADSTER)356Pre-A/A/B Torsion bar cover rear axle with hole, for use with smooth bushings (bushing nr 64433313100) 64433315100 | |
| 38 | (Model: 356 B-T5/T6 COUPE -REUTER- CABRIO HARDTOP ROADSTER)356Pre-A/A/B Torsion bar cover rear axle with hole, for use with ribbed bushings (bushing nr 64433313101) 64433315101 | |
| 38 | (Model: 356 C)356C Torsion bar cover rear axle without hole, for use with ribbed bushings (bushing nr 64433313101) 69533315101 | |
| 39 | (Model: 356 B-T5COUPE
-REUTTER-
CABRIO
HARDTOP
ROADSTER)Hexagon-headbolt m 10 x 30 f >> 131 720 f >> 154 229 f >> 88 663 90007405702 |
|
| 39 | (Model: 356 B-T5/6
356 C
COUPE
-REUTER-
CABRIO
HARDTOP
ROADSTER)Hexagon-headbolt m 10 x 25 f 131 721 >> f 154 230 >> f 88 664 >> 90007504109 |
|
| 40 | Washer 10,5 90002500802 |
|
| 41 | Castlenut 356 64433227100 | |
| 42 | Cotterpin 5 x 45 mm. 90002102502 | |
| 43 | Washer 13 90002500902 |
|
| 44 | (Model: M
1600 SC
CARRERA)Hexagonnut m 12 x 1,5 blue 90007601602 |
|
| 45 | (Model: 1600 /S/S90: M 1600 SC CARRERA)356A/B/C Shock absorber Koni rear with mounting rubbers 64433350110 | |
| 46 | Rubbermounting for 644. 34.501.2 90133379500 |
|
| 46 | Rubbermounting for 644.333.501.10 644.333.501.12 644.333.501.13 64434356110 | |
| 47 | Bush for 644. 41.501.2 64441522 |
|
| 47 | Bush for 644.343.501.10 644.343.501.12 644.343.501.13 64434356210 |
|
| 48 | Rubber mounting for 644.343.501.10 644.343.501.12 644.343.501.13 91133352100 | |
| 49 | Articulatedbush 91133352200 |
|
| 50 | Washer 91133352300 | |
| 51 | Lock nut 90008401302 |