Select your car
rear axle
Model:
356 59
-
Illustration:
501-05
Parts that fit your car
Position | Description & partnr | |
Half-round screw am 4 x 18 90001600301 |
||
Washer 4,3 90002500202 |
||
Hexagon nut m 4 90007600301 |
||
1 | Rear-axle cross-tube 64433120100 | |
2 | Gasket 0,20 mm 64433193101 | |
2 | Gasket 0,10 mm 64433193100 | |
3 | Housing use also: sealing ring 111.501.139 64433122100 |
|
4 | All 356 Solid rear axle boot, sold without strapclamps. (Hub carrier needs to be removed when installing this boot.) 64434191 | |
4 | All 356 Split rear axle boot, sold with screws and clamps. With this boot there is no need to remove the hub carrier for installation. 644341911 | |
5 | Hose clamp Norma 80-100mm 99951235002 | |
6 | Hose clamp Norma 32-50mm 99951249900 | |
7 | Connecting flange 64434011 | |
7 | Connecting flange 64434012 | |
8 | Pin
10 x 40 N0128011 |
|
9 | Spacer 64433123100 | |
10 | Ball bearing, used on all 356 as rear wheel bearing and on 911 (74-83) with sportomatic gearbox as rear mainshaft bearing 90005200600 | |
11 | large o-ring behind rear wheel bearing 356a-b 35634144 | |
12 | All 356 Washer between wheel bearing and spacer 35634402 | |
13 | Washer 35634410 | |
14 | Gasket 35634142 | |
15 | 356 Pre-A/A/B Spacer ring between rear wheel bearing and brakedrum, only for cars with drumbrakes. 35634401 | |
16 | Sealing ring 113501315H | |
17 | Housing 64433125100 |
|
18 | Waved spring washer, M10. N0122301 | |
19 | Fasteningscrew 99907400601 |
|
20 | Rear axle strut 64434104 | |
21 | Hexagon-headbolt m 12 x 1,5 x 22 90008200501 |
|
22 | Washer for rear tracking adjustment bolt 356 35634153 | |
23 | Spring washer b 12 90002801401 | |
24 | Hexagonnut m 12 x 1,5 blue 90007601602 |
|
25 | 356A/B Bracket on rear axle for bump stop, left 64434023 |
|
25 | 356A/B Bracket on rear axle for bump stop, right 64434024 | |
26 | 356A/B Rubber stop rear suspension 64434206 | |
27 | Shouldered bolt 64434205 | |
28 | Spring washer b 12 90002801401 | |
29 | Hexagon-head bolt m 12 x 1,5 x 30 90008200601 | |
30 | All 356, 911 (65-67) Rubber bushing rear torsion arm, smooth 64433313100 |
|
31 | Torsion bar torsion bar see group 5/02/00 64433310101 |
|
32 | 356Pre-A/A/B Torsion bar cover rear axle with hole, for use with smooth bushings (bushing nr 64433313100) 64433315100 | |
33 | Hexagon-headbolt m 10 x 35 90007405802 |
|
34 | Washer 10,5 90002500802 |
|
35 | Castlenut 356 64433227100 | |
36 | Replaced by 90002102502 90002102500 | |
37 | Washer 13 90002500901 |
|
38 | Hexagonnut m 12 x 1,5 blue 90007601602 |
|
39 | (Model: 1600 S CARRERA 1500 GS)356A/B/C Shock absorber Koni rear with mounting rubbers 64433350110 | |
40 | Rubbermounting for 644. 34.501.2 90133379500 |
|
41 | Bush for 644. 41.501.2 64441522 |
|
41 | Bush for 644.343.501.10 644.343.501.12 644.343.501.13 64434356210 |
|
42 | Rubber mounting for 644.343.501.10 644.343.501.12 644.343.501.13 91133352100 | |
43 | Articulatedbush 91133352200 |
|
44 | Washer 91133352300 | |
45 | Lock nut 90008401302 |