frame, body, interior panelling

911S (69-71) (With oil lines in the right rocker panel.) Repair panel for A-pillar lower right. This repair panel is precisely the lower part of the right A-pillar and is situated under the front part of the rocker panel. At the bottom is the holder, where the two oil lines are attached to . In nearly all vehicles that are corroded in the sill area, this part is also affected. The part is about 120mm long and made ​​exactly to the contours of the original part. The surface was sanded and primed with 2 coats epoxy BASF. Thus, the surface is treated to the highest quality. More details at processing. - Material thickness 0.8 mm - EP Primed - Length 120mm

911 (65-89) Wheelwell edge front fender mounting point, left side. This sheet-metal part forms the upper edge of the left wheel house, where the fender mounts and the front bonnet rubber rests. The lower edge reaches even 2 cm into the wheelhouse. The repair panel covers the entire length from the top scuttle off to the front panel. The holes for the fender bolts are pre-drilled. The sheetmetal is of high accuracy of fit and handmade.

911 (65-89) Wheelwell edge front fender mounting point, right side. This sheet-metal part forms the upper edge of the right wheel house, where the fender mounts and the front bonnet rubber rests. The lower edge reaches even 2 cm into the wheelhouse. The repair panel covers the entire length from the top scuttle off to the front panel. The holes for the fender bolts are pre-drilled. The sheetmetal is of high accuracy of fit and handmade.

911 (1974-1997) Alu ignition switch cover plate