Select your car
cylinder head, camshaft, valve
Model:
911-1
-
Illustration:
103-30
Parts that fit your car
Position | Description & partnr | |
Camshaft complete with gear wheel size 0 61610501201 |
||
Camshaft complete with gear wheel -1 61610501211 |
||
camshaft complete with gear wheel size -2 note: when the camshaft housing has become oversized due to usage, you can input a bearing shell to solve the problem. Use 99610143570. 61610501220 |
||
Camshaft complete with gear wheel -2 61610501221 |
||
camshaft complete with gear wheel size +1 note: when the camshaft housing has become oversized due to usage, you can input a bearing shell to solve the problem. Use 99610143570. 61610501230 |
||
Camshaft complete with gear wheel +1 61610501231 |
||
camshaft complete with gear wheel size +2 note: when the camshaft housing has become oversized due to usage, you can input a bearing shell to solve the problem. Use 99610143570. 61610501240 |
||
Camshaft complete with gear wheel +2 61610501241 |
||
All 356 Timing gear wheel -1 aluminium 61610510311 | ||
Gear wheel -2 aluminium 61610510321 |
||
Gear wheel +1 aluminium 61610510331 |
||
Gear wheel +2 aluminium 61610510341 |
||
3 | Locking tab M8, for camshaft or oilpump etc. 99903900100 | |
4 | All 356, 912 (65-69) Bolt kit for camshaft gear wheel, set of 3 correct lenght and strenght (M8 x 13, 10.9) bolts and locking plates. 90007502400 | |
5 | Straight pin 6 x 12 N0131991 |
|
6 | 356/912 Cam follower 53905210 | |
7 | all 356 and 912 Valve pushrod 61610502802 | |
8 | Rocker arm bridge Aluminium 61610503103 | |
9 | Bearing bracket for rocker shaft long 61610530500 |
|
10 | Spring washer b 8 N0122411 |
|
10 | Is changed in 90002500703 90002500702 | |
11 | Nut m 8 90015800101 |
|
12 | Rocker shaft long 61610532100 |
|
13 | Rocker shaft short 61610532500 |
|
14 | Rocker arm 61610503700 | |
15 | Rocker arm long 61610503401 |
|
16 | Rocker arm short 61610503301 |
|
17 | Spring 61610533100 | |
18 | Thrust washer 0,40 mm 53905236 |
|
18 | Thrust washer 0,60 mm 53905237 |
|
18 | Thrust washer 0,50 mm 53905235 |
|
19 | Spacer rocker shaft 61610531200 |
|
20 | Washer 61610531400 | |
21 | All 356, 912 (65-69) Adjusting screw for rockerarm/valve (from engine numbers m 21180 and m 30530 on) 36905243 | |
22 | Nut m 8 x 1 90007801100 |
|
25 | all 356/912 Protectivetube for valve push rods PCG10523100 | |
26 | all 356/912 Gasket cam follower protective tube (16req.) 53905207 |