911 (65-98) Spacer ring kit, 35 mm. This is a set of one spacer ring in 35 mm, the wheel bolts and wheel nuts for one wheel
Select your car
Race & Rallye Equipment
911 (65-98) Spacer ring kit, 43 mm. This is a set of one spacer ring in 43 mm, the wheel bolts and wheel nuts for one wheel
911 (78-85, 89-98), 944, 968 Powerflex polyurethane Bushing for stabilizer 18 mm, set of 2
356 - 912 Racing oil sump kit
Small deep sump for 356 - 912 engines, 0.3L more oil, prevents oil
starvation in long corners, better cooling, strong ring magnetic filter installed. Easy to install, all hardware included. For street and track use.
Notice:
If the 356 has new transmission rubber mounts installed, the deep sump
will have more ground clearance then the lowest point, which is the transmission hoop. Ground clearance on 912 is no problem.
Small deep sump for 356 - 912 engines, 0.3L more oil, prevents oil
starvation in long corners, better cooling, strong ring magnetic filter installed. Easy to install, all hardware included. For street and track use.
Notice:
If the 356 has new transmission rubber mounts installed, the deep sump
will have more ground clearance then the lowest point, which is the transmission hoop. Ground clearance on 912 is no problem.
All 911 (65-67) Powerflex rear spring plate bushing set, set of 2 narrow and 2 wide bushings.
All 356, 911 (65-68) Headlight mesh grill set, can be mounted on early "flat glass" headlights only. These grills fit over the chrome headlight ring and come complete with mounting hardware.
911 (R) Steel fuel tank 100 L with fender filler, as used on the race cars between '64 and '73. This is a beautifully made reproduction using the bottom half, filler neck and fuel sender fitting from a new Dansk tank, with a custom stamped top to ensure proper fitment and exact finish as original. Baffles are welded inside to minimize fuel slosh and starvation.
911 (R) Steel fuel tank 100 L with center filler neck, as used on the race cars between '64 and '73. This is a beautifully made reproduction using the bottom half and fuel sender fitting from a new Dansk tank, with a custom stamped top to ensure proper fitment and exact finish as original. Baffles are welded inside to minimize fuel slosh and starvation.
All 911 (68-89) Powerflex rear spring plate bushing set, set of 4 equal width bushings.
911 (68-89) Sport bushingset rear spring plate, set of 4 in 85 shore hardness.