Select your car
front axle
Model:
911-1
-
Illustration:
401-05
Parts that fit your car
Position | Description & partnr | |
1 | auxiliary support 90134101303 |
|
2 | hexagon-head bolt M 12X1,5X80 90008202002 |
|
3 | Lock ring b 12 f >> 110 406 f >> 153 022 f >> 87 491 up to transmission number 35 000 b = from transmission number 35 001 90002701702 |
|
4 | protective plate 90134116103 |
|
4 | protective plate 90134116203 |
|
5 | Replaced by 90134116500 90134116600 |
|
5 | 911 (65-73) Sealing rubber for front axle protection plate, set of 2. 90134116500 | |
6 | 911 (65-73) Sealing rubber for front axle protection plate, set of 2. 90134116500 | |
7 | Hexagon-headbolt
m 10 x 20 90007504002 |
|
10 | 911 (68) Front wishbone, left. This wishbone fits models with the early version ball joint but with the newer version mounting rubbers. 90134100500 | |
10 | 911 (68) Front wishbone, right. This wishbone fits models with the early version ball joint but with the newer version mounting rubbers. 90134100600 | |
11 | 911 1967-1973 | 911 right side 1973-1989 | 912 1967-1970 Protective bracket for wishbone, front 90134115900 | |
12 | Hexagon-head bolt M10 X 35 N0102753 | |
13 | Reverse lever 90134103301 | |
14 | Seal torsion bar front 911 (65-89), 914 (70-71) 90134147500 |
|
15 | adjusting screw 99908300301 |
|
16 | Cover plate 90004000801 | |
17 | Hexagon-head bolt m 8 x 8 90007502202 |
|
18 | Spring washer b 8 N0122411 |
|
19 | 911 (65-68) Lower balljoint front suspension, can be used on both sides. 90134104700 | |
20 | sealingbellows 90134147100 |
|
21 | Castle nut N0112122 | |
22 | Cotter pin 3 x 25 N0125321 |
|
23 | bearingbracket 90134373500 |
|
24 | hexagon-headbolt M 12 X 1,5 X 45 S 90008202902 |
|
25 | Castle nut N0112122 | |
26 | Cotter pin 3 x 25 N0125321 |
|
27 | 911 (65-89) Torsion bar front left, 19mm 90134310112 | |
27 | 911 (65-89) Torsion bar front right, 19mm 90134310212 | |
28 | (Model: 911 L/L (USA)stabiliser $ 11 90134370305 |
|
28 | (Model: 911 (USA)
912)stabiliser $ 13 90134370301 |
|
28 | (Model: 911S) 911 (65-73), All 914 Front stabiliser bar, 15 mm. 90134370303 |
|
28 | stabiliser $ 14 90134370302 |
|
28 | stabiliser $ 16 90134370304 |
|
29 | (Model: 911 L/L(USA))rubbermounting 90134379203 |
|
29 | (Model: 911 (USA) 912)Stabiliser mounting for 13/14 mm stabiliser bar 90134379201 | |
29 | (Model: 911S)911 (65-73), All 914 Front Stabiliser bar mounting rubber, 15 mm. 90134379202 | |
30 | (Model: 911 S/L 911 /L:(USA) 912)Stabiliser mounting 90134375401 | |
31 | (Model: 911 TU)sealingwasher 90134376600 |
|
32 | (Model: 911 TU)911 (65-73) Blanking cap for front stabilizer bar opening, for models without stabilizer bar. 90134376500 | |
33 | Hexagon-headbolt m 8 x 25 90007508302 |
|
34 | Is changed in 90002701503 90002701502 | |
35 | Lever 90134371301 | |
36 | Hexagon-head bolt M8 x 65 90007413502 | |
37 | Guide piece 90134376300 | |
39 | 911 (65-73), 911 Turbo (75-77) Front drop link for stabiliser bar, fits left and right 90134307603 | |
40 | 911 (65-73), 911 Turbo (75-77), All 914. Rubber bushing for front stabiliser drop link 90134378300 |
|
41 | 911 (65-73), 911 Turbo (75-77), All 914. Spacer tube for front stabiliser drop link 90134373700 |
|
42 | hexagon-head bolt M 8 X 40 90007413002 |